Friedrich

PZE07K3SC

7,200 BTU Packaged Terminal Air Conditioner with 6,800 Electric Heat, 12.0 EER, 0.7 Pts/Hr Dehumidification, and Diamonblue™ Advanced Corrosion Protection

• Superior materials and design reduce sound levels and improve overall guest satisfaction.

• Aluminum endplates reduce corrosion of the outdoor coil.

• A galvanized zinc-coated steel wall sleeve and steel base pan undergo an 11-step preparation process, are powder-coated with a polyester finish, and are oven-cured at high temperatures for exceptional durability.

• Factory run-tested units reduce problems in the field.

• Internal diagnostic programs can alert maintenance to component failures or operating problems.

• Room freeze protection initiates heat if the temperature falls to 50°F inside an unoccupied guest room.

• Random compressor restart protects electrical systems from overload when power is restored.

• Tamper-resistant anodized stamped aluminum grille withstands chalking and oxidation.

• Breakproof control door design maintains the integrity of the unit.

• The indoor coil frost sensor protects the compressor to lengthen the life of the unit.

• Super-efficient refrigeration design with EERs up to 12.0 and COP up to 3.55.

• Exceptional FriedrichLink® energy management thermostats are available (wired & wireless) with an integrated occupancy sensor, five distinct energy presets, and comprehensive remote management capability.*

• Energy-efficient heat pump models are available in our complete line.

• Electronic defrost control ensures more run time in efficient heat pump mode.

• Electronic temperature limiting to adjust low/high-temperature range limits for reduced energy usage.

• Slinger ring technology in a condensate removal system cools the coil and increases efficiency.

• Central desk control is ready to allow hotel owners to control units from a central location.

• A full complement of Indoor Air Quality Products has been certified through installation and testing to ensure exceptional air quality is achieved when FreshAire® IAQ accessories are added.

• Dehumidification removes up to 3.0 pints/hour of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth.

• Fresh air damper brings in fresh outside air when desired.

• Intuitive unit controls are user-friendly with an easy-to-read LED display that can show either set-point or actual room temperature as selected by the owner.

• Air filters are easy to access and washable.

• Instant Heat heat pump mode quickly heats a room to the desired temperature for increased comfort.

• Automatic periodic sampling of room temperature every nine minutes to ensure desired conditions are maintained.

• Reversible indoor air louvers to easily change the direction of airflow.

• Indoor and outdoor coils are coated to resist corrosion in harsh outdoor environments.

• Modular product design ensures easy access to key components for cleaning and repairs, including washable, lift-out air filters.

• The remote thermostat pop-out wiring module allows easier wiring and unit change-out without rewiring the thermostat.

• Surehold Front Cover System® securely attaches the front each time.

• It may be installed flush with the floor.

• Two permanently lubricated fan motors for added durability and reduced sound levels indoors.

• Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietly.

• High-density insulation and steel inner wall block outdoor noise.

• The tangential blower wheel creates a wide path of air flow that reaches the furthest corner of the guest room more quietly than conventional fans.

• 2-year full warranty on parts and labor and a 5-year limited warranty.

• Nationwide service network and U.S.-based Friedrich expert technical team ensure you

• get fast, knowledgeable service.