Thermador Professional Series PCG486NL 48 Inch Pro-Style Gas Rangetop with 6 Pedestal Star Burners, Griddle or Grill Option, Metal Knobs, Precision Simmering and Island Trim: Grill

48" Professional Series Rangetop

• Exclusive, patented Star Burner - most even heating, unsurpassed flame coverage

• Every burner 18,000 BTU (NG)

• Precision simmering capabilities as low as 100°F (375 BTU) with 2 ExtraLow Simmer burners

• Widest range of simmer options from 375 BTU to 3,000 BTU

• Superior griddle results, 6-pass 1,630 watt electric griddle

• Grill accessory is thermostatically controlled for even heating

• Bold Professional design

• Patented Pedestal Star Burner with QuickClean Base feature

• Restaurant style metal knobs

• Professional style, continuous cast iron grates

• Continuous porcelain, easy to clean cooking surface

• Star design delivers superior heat spread for any size pan

• Simmer without stirring/scorching with exclusive ExtraLow

• QuickClean Base feature designed for easy surface cleaning

• Titanium surface non-stick, rust-proof cast-aluminum griddle

• Removable griddle and grill accessory for easy clean-up

• Signature blue indicator lighting

• Island trim shipped standard with rangetop

• To ensure professional results, the cabinet and counter top openings should be prepared by a qualified cabinet worker.

• The rangetop can be installed in various positions with the front either flush or projecting, depending on the counter top's depth.

• The rangetop is designed to hang from the counter top by it's side flanges.

• The counter top however, must be strong enough to support the rangetop.

• It may be necessary to add a supporting cleat along each side or a 2 x 4 corner brace.

• Another alternative would be to construct a deck to set the rangetop on.

• Thermador Professional Rangetops may be installed above a Thermador Warming Drawer to create a convenient cooking center.

• A minimum of 2 3/4" clearance is required between the bottom of the rangetop and the top of the warming drawer.

• A backguard must be installed when there is less than a 12" horizontal clearance between combustible materials and the back edge of the rangetop.

• The Thermador Low Backguard must be ordered separately and installed at the rear of the rangetop.

• For island installations and other installations with more than 12" clearance, the provided stainless steel island trim will cover the backguard mounting flanges.

• Thermador Professional Rangetops are shipped by the factory to operate on natural gas.

• They must be converted for use with propane.

• Verify the type of gas being used at the installation site matches the type of gas used by the appliance.

• If the location/job site requires conversion from natural gas to propane (LP), order PALPKITHC.

• Field conversion must be done by qualified service personnel only.

• We strongly recommend that a Thermador Professional Wall or Island Hood or Custom Insert be installed with all Thermador Professional Rangetops.

• Downdraft ventilation should not be used.

• Do not install a microwave-hood combination above the rangetop, as these types of units do not provide the proper ventilation and are not suitable for use with Thermador Professional Rangetops.