Description
Base Command Unit
The HydroTap by Zip Water is more than just a water system, it's cooking made easy and it's water at its best. That's because the HydroTap 120V BC command center provides users instant access to filtered boiling and chilled water. This command center is ideal for residential and small commercial applications and can be paired with any of our various tap styles.
Specifications
Overview
Water Pressure:
Min 37psi - Max 100psi (2.60 - 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79 lpm)
Water Connection:
½ BSP - isolation valve is required within 3' (0.9m) of the installation
Integral Water Values:
All HydroTap systems are fitted with a Dual Check Valve and a 50psi, 3.52kg/cm2 Pressure Limiting Valve
Water Supply Requirements:
Potable drinking water supply
Optimal Total Dissolved Solids (TDS) Range:
TDS Min 50ppm - Max 150ppm
Integral Water Filter:
0.2 micron, 1 size - replace every 1,100 gallons / 4,163 liters or 12 months
Power Rating:
110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
Dimensions (WxDxH):
13.3 x 18.2 x 13.1 / 339mm x 462mm x 333mm
Minimum Air Gap:
Minimum of 2 / 50mm clearance on left and right side and 8 / 200mm above
Minimum Cabinet Size:
18" wide x 24" deep / 457mm wide x 610mm deep
Maximum Hose Connection Length:
3' / 0.9m (tap to command center)
Minimum Distance Needed for Installation:
15" / 381mm (interior wall to garbage disposal)
Product Approvals:
IAPMO - NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC
Features
Overview
- Provides Instant Filtered, Boiling and Chilled Water 3 Year Warranty
Filtration System
- 0.2 Micron Built-In Filtration, Boiling Water Safety Mode on Tap
- Power-Pulse Technology Maintains Boiling, Water Within 0.4°F of Set Temperature Air-Cooled Refrigeration System Allows
Temperature Measurements
- Boiling Water is Factory Set at 209°F,
- Chilled Water is Factory Set at 44°F
- 85 cups of Boiling Water per Hour - 120v,75 cups of Boiling Water per Hour
California residents see
Prop 65 WARNINGS
