Overview
Water Pressure:
Min 37psi – Max 100psi (2.60 - 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79 lpm)
Water Connection:
1 /2” MIP by 3 /8” COMP - isolation valve is required within 3’ (0.9m) of the installation
Integral Water Values:
All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm2) Pressure
Limiting Valve Water Supply Requirements:
Potable drinking water supply
Solids (TDS) Range:
TDS Min 50ppm – Max 150ppm
Integral Water Filter:
0.2 micron, 1 size - replace every 1,100 gallons / 4,163 liters or 12 months
Power Rating:
110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
Dimensions (WxDxH):
11” x 16.9”” x 13.1” / 280mm x 429 x 333mm
Minimum Air Gap:
Minimum of 2” / 50mm clearance on right side and ~8” / 200mm above
Minimum Cabinet Size:
15” wide x 24” deep / 381mm wide x 610mm deep
Maximum Hose Connection Length:
3’ / 0.9m (tap to command center)
for Installation:
15” / 381mm (interior wall to garbage disposal)
Product Approvals:
IAPMO - NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1087; cUL; CEC
Warranty:
5-year tank warranty; 2-year limited parts and labor warranty
Compatible CO2 Cylinder:
Zip Water 1.5lb CO2 or 5lb CO2 (if space allows) with CGA 320 fitting
CO2 Operating Pressure:
Min 39psi - Max 44psi / Min 2.74 - Max 3.09kg/cm2
