Home
refrigeration
beer coolers & kegerators

Dual-Tap Beer Kegerators

Q: What is a dual-tap beer kegerator?

A dual-tap beer kegerator is a refrigerated draft beer dispenser with 2 faucets. A typical setup uses separate beer lines and keg couplers to serve 2 beers from separate kegs. The taps generally share one refrigerated compartment, so both beers are stored at the same temperature even though they have separate dispensing paths.

Q: Do both taps use the same type of keg coupler?

Not necessarily. Each keg needs a coupler that matches its valve, and the correct connection depends on the brewery and keg system. The D-system Sankey coupler is common for American beers, while some imported beers use other systems. Confirm the coupler requirement for each beer rather than assuming both kegs use the same connection.

Q: Can you set a different CO2 pressure for each tap?

Yes, if the gas system has independently adjustable pressure controls for each keg, such as a dual-pressure regulator or secondary regulators. A splitter or manifold with shutoff valves alone does not provide separate pressure settings. Independent adjustment is useful when the 2 beers require different carbonation levels; check the brewery’s serving guidance for each.

Q: Can both taps connect to the same keg?

Yes, a draft system can be configured to feed 2 faucets from one keg using a suitable beer-line splitter and compatible connections. However, that is different from the usual dual-tap arrangement of one keg per faucet. Do not assume a dual-tap kegerator includes the fittings for this configuration; check its draft-system documentation.

Q: What is the difference between built-in and freestanding dual-tap kegerators?

Built-in dual-tap kegerators are designed for installation within cabinetry, typically with ventilation through the front. Freestanding models require open space around their designated ventilation areas and should not be enclosed unless the manufacturer permits it. Choose based on your planned location, and follow the installation manual’s ventilation and clearance requirements rather than relying on appearance.

Dual-tap beer kegerators let you serve 2 draft beers from a single refrigerated dispenser. Compare the keg sizes and combinations each model accommodates, along with overall dimensions and included dispensing equipment, to find the right fit for your home bar. For placement under a counter, confirm that the model is approved for built-in installation and check its ventilation and clearance requirements.

0 Results

Dual-Tap Beer Kegerators

Dual-tap beer kegerators let you serve 2 beers from separate faucets while keeping the kegs refrigerated in 1 cabinet. They suit home bars, game rooms, and entertaining spaces where you want a choice of beers without setting up separate dispensers. The number of taps does not determine keg capacity, so compare the supported keg sizes and configurations rather than assuming every cabinet holds the same combination. For reference, a U.S. sixth-barrel keg holds 5.16 gallons, while a quarter-barrel keg holds 7.75 gallons; their different footprints make the manufacturer’s keg layout an important part of your selection.

Choose the installation type before comparing convenience features, because freestanding and built-in kegerators have different ventilation requirements. An undercounter installation needs a model approved for that placement, with its ventilation openings unobstructed; a freestanding unit needs the clearances specified by its manufacturer. Compare cabinet width, height, and depth in inches against your available space, allowing additional room for the dispensing tower, faucet handles, door swing, and access when changing kegs. For a patio or outdoor kitchen, select an outdoor-rated unit, and check the required electrical connection, operating conditions, delivery path, and space for any externally mounted gas cylinder before ordering.

The dispensing equipment matters as much as the refrigerated cabinet, particularly when you plan to serve beers with different carbonation requirements. A gas splitter supplies both kegs at the same regulated pressure, while independently adjustable pressure controls allow each keg’s pressure to be set separately. Check which couplers, regulators, beer lines, gas lines, and cylinders are included, and confirm that the couplers match the kegs you intend to buy; the common Sankey D connection fits many U.S. beers, but it is not universal. A standard CO2 setup also should not be assumed suitable for nitrogen-dispensed stout, which can require a different gas blend, regulator, and faucet.

For everyday use, compare temperature controls, access to the keg compartment, drip-tray design, and how easily the faucets and lines can be cleaned. Consistent beer temperature and a properly balanced dispensing system help control foaming, while regular cleaning removes residue that can affect flavor and flow. Match keg size to how quickly you expect to finish the beer, and account for gas refills and line-cleaning supplies as part of ownership. If you are choosing a kegerator as a gift, confirming the recipient’s installation space and preferred keg formats is more useful than choosing by tap count alone.

AJ Madison offers product expertise and showroom consultations to help you compare appliance options, along with a nationwide delivery network and customer support.