Amana DigiSmart PTC093E35A

From the beginning, every Amana brand product has been made
with the same core philosophy: to provide customers with
high-quality products that are reliable, meet their needs, and
last longer than the rest. And they keep that philosophy firmly
in mind as they build industry-leading Amana Packaged
Terminal Air Conditioners (PTACs) and air-conditioning and
heating products.

Whether you are in the hotel/hospitality industry or provide
assisted living services, Amana PTACs are designed to
simplify your home or business with plain-and-simple product durability and advanced energy management features, all the while
helping to create the best environmental experience for customers.

Product Features
Nominal Coooling BTUH:	9,000
EER:	11.4
Electric Heater:	2.9kW
Electric Heating BTUH:	9,900
Cooling BTUH:	8,900
Unit w/o Electric Heater
Min. Circuit Amps:	5.4
CFM(Cool/Wet Coil):	215(High)
CFM(Cool/Wet Coil):	190(Low)
CFM(Dry Coil):	235(High)
CFM(Dry Coil):	205(Low)
Dehumidification(Pints/hr):	2.6
Dimensions
Width:	42"
Depth:	21 1/2"
Height:	16 1/16"
Weight:	95 lbs.
Electrical Requirements
Amps:	20
Volts:	208

• Set-Back Mode
• The owner can determine amount of time unit is left 'untouched' (buttons not pushed) before the PTAC begins a set-back routine and new thermostat temperature takes effect
• All set-back routines can be changed by owner.
• Maintenance Status
• Separate green LED indicator light to show if unit requires maintenance
• Electronic Temperature Limits
• Owner can set separate cooling and heating temperature ranges and limit operation to one-degree increments, saving energy by preventing guests from over-cooling or over-heating
• Enhanced Dehumidification Cooling Mode
• The unit can be set to lengthen cooling cycles while the room is occupied or unoccupied
• This passes more air through the unit while the coil is below the dew point, increasing the amount of moisture removed
• Unit Diagnostics
• When switched to diagnostics mode, the unit shows ten different self-diagnosis codes to help keep the unit running most efficiently.
• Freeze Protection
• when sensors show temperature of 40°F or below, the unit automatically activates the fan motor and the electric or hydronic heat to help prevent burst water pipes or broken fixtures caused by freezing temperatures
• Extended Heating with the Heat-Pump
• Heat pump models will operate in heat-pump mode with external temperatures as low 24°F to provide additional energy savings
• 30-Second Fan-Off Delay
• The fan continues to run for 30 seconds after the compressor has stopped or after electric heat has been turned off
• This improves efficiency by dispersing the cooled or heated air still on the coil into the room

Ownersa Manual