Amana PBH113E35BX
11,500 BTU Through-the-Wall Air Conditioner with 11,000 BTU Heat Pump Capacity, Electric Heat Backup, 265 CFM, Electronic Touchpad, Remote Control, 9.4 Energy Efficiency Ratio and Energy Star Rated


No Longer Available

Replaced by PBH113G35CB   compare>>

Additional Options


Extruded Aluminum Architectural Outdoor Grille: Stonewood Beige

(PBAGK01TB) (required) preview
+ $68.00 

Insulated Solid Side Metal Sleeve with Weather Board and Stamped Aluminum Grille

(PBWS01A) (required)
+ $85.00 

Extruded Aluminum Architectural Outdoor Grille: Special Custom Colors

(PBAGK01SB) preview
+ $68.00 

26" Trim Kit For Friedrich and Fedders Wall Sleeves

+ $42.00 

Insulated Room-Side Panel for PBWS01A

+ $40.00 
The PBH113E35BX has a 4-way adjustable airflow to allow for cooling or heating to any part of the room and a high energy-efficiency that saves you money when compared to other competition models. It also features an easy removable condensor top that allows for quick and complete cleaning of outdoor coils. This access for cleaning the outdoor coil enables easy removal of dirt and debris to dramatically lengthen the life of the compressor and other sealed system components. Six easy access screws and let the cleaning begin! Not available on competitor models.

How to Choose a Room Air Conditioner
Compared to large capacity central units, room air conditioners have several advantages. The initial cost of a room air conditioning unit is significantly lower than the cost of central air. Because room air conditioners are designed for cooling small spaces, operating costs are reduced. And, room air conditioners can provide personalized temperature and humidity controls that central systems cannot.

Calculating Cooling Capacity
Cooling capacity is the critical factor in properly selecting a room air conditioner. Cooling capacity is measured in British Thermal Units (BTUs) and typical models will range in capacity from 5,000 BTUs to 28,500 BTUs.

Choosing an undersized unit will overwork the unit and it will not cool properly. Choosing an oversized unit will cost more to buy and operate and it will not dehumidify properly.

We can help you to calculate capacity. Be prepared to provide specific information on:
  • Room Dimensions
  • A simple floor plan to show the location of doors and north-facing windows
  • The number of people it will serve
  • Sources of heat such as lamps, TV and appliances
  • An explanation of what's above the intended room
  • Your insulation provisions

Cooling Capacity by Room Size
Measure the length and width of the area to be cooled. Multiply the length by the width to determine square footage or square meters. When cooling rooms with uninsulated ceilings, great rooms, or southern or western sun exposures - step up to the next BTU size.

Room SizeBTU
Sq. Ft.Sq. m
15014 up to 5,000
16515 5,200
Energy Info
This air conditioner has an Energy Efficiency Rating of 9.4 and has an estimated yearly operating cost of $101.76.

The estimated yearly operating cost is based on the 2011 national average cost of $.1109 cents per kWh for electricity and an estimated number of operating hours of 750 hours. Your operating cost will depend on your utility rates and usage.
Chassis Width: 26"
Chassis Depth: 16 7/8"
Chassis Depth Installed with Room Front Cover Attached: 21 7/8"
Chassis Height: 15 5/8"
Sleeve Cutout Width: 26 3/16"
Maximum Wall Thickness: 16 3/8"
Sleeve Cutout Height: 15 13/16"
PBWS01A Sleeve Width: 26"
PBWS01A Sleeve Depth: 16 3/4"
PBWS01A Sleeve Height: 15 5/8"
General Features
Voltage: 230/208
Approx. Chassis Weight: 81 lbs.
Approx. Shipping Weight: 95 lbs.
Capacity: 11,500/11,100 BTUH
Amps: 5.7/6.2
Watts: 1,220/1,180
CFM: 265
E.E.R.: 9.4/9.4
Energy Star Qualified: Yes
Dehumidification: 3.4 pts./hr.
Electric Heat
Capacity: 11,000/9,000
Amps: 15.0/14.0
Watts: 3,500/2,900
Heat Pump (Reverse Cycle)
Capacity: 11,000/10,700 BTUH
Amps: 5.2/5.6
Watts: 1,195/1,160
C.O.P: 2.7/2.7
Adjustable Changeover Thermostat: Yes
Thermostatic Drain Valve: Yes
Electrical Data
Circuit Breaker Size: 6-20P
Plug Type: Perpendicular
Power Cord Length: 6.0 ft. with LCDI
Agency Approval: U.L. Listed; USA and Canada
Chassis Type: Slide-out for easy installation and service accessibility
Fan Speeds: 2 Speeds: High & Low
Energy Saver: Yes - Cooling Only; Auto Fan Operation
Fan ONLY: Yes - High Speed
Exhaust CFM: 300
Discharge Air: Top Discharge with 4-way adjustable air throw
Slide-out Filter: Top Pull-out Polypropylene - Permanent filter that is washable
Condensate Drain Spout: Yes - external drain spout on the PBWS01A optional wall sleeve
Optional Accessories
PBWS01A: Insulated metal sleeve with solid side and bottom with weather board and stamped aluminum grille. Color: Beige
PBAGK01TB: Architectural Grille kit for use with PBWS01A sleeve. Color: Beige
PBAGK01SB: Architectural Grille kit for use with PBWS01A sleeve. Color: Custom Colors
PBWMFC01A: An insulated metal cover for use when PBWS01A is installed without 26" Built-in Air Conditioner
PBFAK01A: Sleeve Adapter kit; converts Fedders BSAOOC & Friedrich WSC 27" wall sleeves for use with Amana 26" Built-in Air Conditioners.
Entire Unit: 1 Year
Sealed System Components: 5 Year
  • Electronic Touch Pad with Remote Control
  • Energy Star Rated
  • High Energy Efficiency with Models up to 9.8 EER
  • Saving you money when compared to lower EER models.
  • Easy Removable Condenser Top
  • That allows for quick and complete cleaning of outdoor coils.
  • This access for cleaning the outdoor coil enables easy removal of dirt and debris to help lengthen the life of the compressor and other sealed system components.
  • Six easy access screws and let the cleaning begin!
  • Not available on competitor models!
  • Easy Access Slide Out Filter
  • Has a permanent polypropylene filter mesh that is easy to remove and clean.
  • Accessory Wall Sleeve:
  • PBWS01A is a solid-side, heavily insulated metal sleeve.
  • It includes a stamped aluminum exterior grille with a weather-seal rear enclosure for installation without the chassis.
  • The sleeve has a solid bottom for complete weather-tight installation.
  • An optional PBWMFC can be used when a more permanent weather seal is needed for sleeves installed without the chassis.
  • 100% Full Factory Run Test
  • On all units for high reliability and dependability.
  • Units start the first time - every time!
  • 4-Way Adjustable Airflow
  • To allow for cooling or heating to any part of the room.
  • Quiet Operation
  • Designed with guest comfort in mind - providing reliable, quiet operation for years to come.
Info and Guides

Adobe Acrobat FileTTW Spec Sheet

You will need Adobe Acrobat Reader to view and print pdf files

Adobe Reader
Product Reviews
Items to Compare

Quick LookQuick Look

Quick Specs
Quick Specs


  • Width : 26 Inch
  • Depth : 21 7/8 Inch
  • Height : 15 5/8 Inch


  • Type : Wall
  • Chassis Type : Thru the Wall
  • Wall Sleeve Included : No
  • Cooling Capacity (BTU) : 11,500 BTU
  • Maximum Cooling Amps : 5.7 Amps
  • Maximum Cooling Watts : 1,220 Watts
  • Heating Capacity (BTU) : 11,000 BTU
  • Maximum Heating Amps : 5.2 Amps
  • Maximum Heating Watts : 1,195 Watts
  • Heat : Heat Pump with Electric Heat Backup
  • CFM Room Circulation : 265 CFM
  • Energy Efficiency Rating : 9.4
  • Control Type : Digital
  • Remote Control Included : Yes
  • PTAC : No

Technical Details

  • Energy Star Rated : Yes
  • ADA Compliant : No
  • Plug Type : 6-20P
  • Voltage : 230/208 Volts
Are you a builder

© 2016, AJ Madison Inc. or its affiliates