Free Shipping

Amana PBH092B12MB

9,000 BTU Through-the-Wall Mini-PTAC with 8,700 BTU Heat Pump Capacity, 258 CFMs, 4-Way Adjustable Airflow and 9.4 Energy Efficiency Ratio


No Longer Available

Replaced by PBH092G12CB   compare>>

Price Match Policy Price Match Policy
Printer Friendly Page Print
Share this item:

Additional Options

Optional Accessories


Insulated Solid Side Metal Sleeve with Weather Board and Stamped Aluminum Grille

(PBWS01A) (required)
+ $85.00 

26" Trim Kit For Friedrich and Fedders Wall Sleeves

+ $42.00 

Insulated Room-Side Panel for PBWS01A

+ $40.00 

Extruded Aluminum Architectural Outdoor Grille: Stonewood Beige

(PBAGK01TB) preview
+ $68.00 

Extruded Aluminum Architectural Outdoor Grille: Special Custom Colors

(PBAGK01SB) preview
+ $68.00 
The PBH092B12MB has a 4-way adjustable airflow to allow for cooling or heating to any part of the room and a high energy-efficiency that saves you money when compared to other competition models. It also features an easy removable condensor top that allows for quick and complete cleaning of outdoor coils. This access for cleaning the outdoor coil enables easy removal of dirt and debris to dramatically lengthen the life of the compressor and other sealed system components. Six easy access screws and let the cleaning begin! Not available on competitor models.

How to Choose a Room Air Conditioner
Compared to large capacity central units, room air conditioners have several advantages. The initial cost of a room air conditioning unit is significantly lower than the cost of central air. Because room air conditioners are designed for cooling small spaces, operating costs are reduced. And, room air conditioners can provide personalized temperature and humidity controls that central systems cannot.

Calculating Cooling Capacity
Cooling capacity is the critical factor in properly selecting a room air conditioner. Cooling capacity is measured in British Thermal Units (BTUs) and typical models will range in capacity from 5,000 BTUs to 28,500 BTUs.

Choosing an undersized unit will overwork the unit and it will not cool properly. Choosing an oversized unit will cost more to buy and operate and it will not dehumidify properly.

We can help you to calculate capacity. Be prepared to provide specific information on:
  • Room Dimensions
  • A simple floor plan to show the location of doors and north-facing windows
  • The number of people it will serve
  • Sources of heat such as lamps, TV and appliances
  • An explanation of what's above the intended room
  • Your insulation provisions

Cooling Capacity by Room Size
Measure the length and width of the area to be cooled. Multiply the length by the width to determine square footage or square meters. When cooling rooms with uninsulated ceilings, great rooms, or southern or western sun exposures - step up to the next BTU size.

Room SizeBTU
Sq. Ft.Sq. m
15014 up to 5,000
16515 5,200
PBWS01A Sleeve Height: 15 5/8"
PBWS01A Sleeve Width: 26"
PBWS01A Sleeve Depth: 16 7/8"
Depth with Chassis Installed and Room Front Cover Attached: 21 7/8"
Sleeve Cutout Height: 15 13/16"
Sleeve Cutout Width: 26 3/16"
Maximum Wall Thickness: 16 3/8"
General Features
Voltage: 115
Approx. Chassis Weight: 85 lbs.
Approx. Shipping Weight: 98 lbs.
Capacity: 9,000 BTUH
Amps: 8.5
Watts: 985
CFM: 258
E.E.R.: 9.4
Energy Star Qualified: Yes
Dehumidification: 2.5 pts./hr.
Electric Heat
Capacity: 3,900 BTUH
Amps: 12.0
Watts: 1,150
Heat Pump (Reverse Cycle)
Capacity: 8,700 BTUH
Amps: 7.5
Watts: 870
C.O.P: 3.0
Adjustable Changeover Thermostat: Yes
Thermostatic Drain Valve: Yes
Electrical Data
Circuit Breaker Size: 15-amps
Plug Type: Parallel
Power Cord Length: 8.0 ft. w/ LCDI
Agency Approval: U.L. Listed; USA and Canada
Chassis Type: Slide-out for easy installation and service accessibility
Fan Speeds: 2 Speeds: High & Low
Energy Saver: Yes - Cooling Only; Auto Fan Operation
Fan ONLY: Yes - High Speed
Exhaust CFM: 300
Discharge Air: Top Discharge with 4-way adjustable air throw
Slide-out filter: Top Pull-out Polypropylene - Permanent filter that is washable
Condensate drain spout: Yes - external drain spout on the PBWS01A optional wall sleeve
Optional Accessories
PBWS01A: Insulated metal sleeve with solid side and bottom with weather board and stamped aluminum grille. Color: Beige
PBAGK01TB: Architectural Grille kit for use with PBWS01A sleeve. Color: Beige
PBAGK01SB: Architectural Grille kit for use with PBWS01A sleeve. Color: Custom Colors
PBWMFC01A: An insulated metal cover for use when PBWS01A is installed without 26" Built-in Air Conditioner
PBFAK01A: Sleeve Adapter kit; converts Fedders BSAOOC & Friedrich WSC 27" wall sleeves for use with Amana 26" Built-in Air Conditioners.
Entire Unit: 1 Year
Sealed System Components: 5 Year
  • High Energy-Efficiency with Models up to 9.5 EER saving you money when compared to other competition models.
  • Easy Removable Condenser Top that allows for quick and complete cleaning of outdoor coils.
  • This access for cleaning the outdoor coil enables easy removal of dirt and debris to dramatically lengthen the life of the compressor and other sealed system components.
  • Easy Access Slide-Out Filter has a permanent polypropylene filter mesh that is easy to remove and clean.
  • 100% Full Factory Run Test on all units for high reliability and dependability. Units start the first time - every time!
  • 4-Way Adjustable Airflow to allow for cooling or heating to any part of the room.
  • Quiet Operation. Designed with quest comfort in mind - providing reliable, quiet operation for years to come.
  • Note: Chassis are sold without a wall sleeve and can retro-fit into GE, Amana and many other 26" solid-sided sleeves.
Product Reviews
Rated 4.3 out of 5 by 4 reviewers.
Rated 5 out of 5 by Great Heat pump This seems to be a nice unit and was easy to install. I installed the unit in a window. It was simple I first installed a mount and then screwed some .75 X .75 aluminum angle around casing. Then screwed the unit casing to the window and filler plywood caulked it and it works like a charm. To get a good 1/4 bubble tilt , install the top angle and screw it in place to the casing then to the window frame get your 1/4 bubble then mark where the bottom angle goes on each side. The side angle will simply go from top to bottom at the 1/4 bubble angle automatically. I won't know how well the heat works until winter, although it should be more than adequate here in Florida. The packaging and shipping were great. I would purchase this unit again from A J Madison. 6/1/09
Rated 5 out of 5 by Great for small sunroom We had this installed in a 10x12 sunroom and it is great. It heats the room quickly and most of all, it runs on regular household current--no expensive wiring. Unlike the motel size units, this one doesn't shut off automatically which is the only thing we don't like, but that is a small problem. The vents can be pointed up so no direct drafts on anyone sitting near it. Would highly recommend. A. J. Madison was a good company to work with and unit was delivered in wonderful shape and on time. We, of course, haven't tried the AC but feel sure it will be more than ample. 10/19/09
Rated 2 out of 5 by Would not recommend for climates that get below 40 I bought this unit for heating and cooling a 10x12 4 season patio room. Its small and compact, but, I've found out its a little noisy,fan runs all the time on heat setting,and is pretty expensive to operate when temp dips below 40 degrees. That is when the back-up heat runs all the time and you could use your electric meter for a fan it turns so fast. Don't let the energy star rating fool you. This is 115 volt unit and found out later a 230 volt unit would have been a little cheaper to operate.(My Bad) 1/20/10
Rated 5 out of 5 by Nice unit Easy to install. Havent tried AC, Heat is great! For a 110v unit. Does very well untill it gets below freezing. After that it just blows cold air. The back up heat doesnt seem to be all that great! 3/27/10
  • 2015-11-30 T10:19:22.587-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_4, tr_4
  • loc_en_US, sid_PBH092B12MB, prod, sort_default
1-4 of 4
Items to Compare

Quick LookQuick Look

Quick Specs
Quick Specs


  • Width : 26"
  • Depth : 21 7/8"
  • Height : 15 5/8"


  • Type : Wall
  • Chassis Type : Thru the Wall
  • Wall Sleeve Included : No
  • Cooling Capacity (BTU) : 9,000 BTU
  • Maximum Cooling Amps : 8.5 Amps
  • Maximum Cooling Watts : 985 Watts
  • Heating Capacity (BTU) : 8,700 BTU
  • Maximum Heating Amps : 7.5 Amps
  • Maximum Heating Watts : 870 Watts
  • Heat : Heat Pump with Electric Heat Backup
  • CFM Room Circulation : 258 CFM
  • Energy Efficiency Rating : 9.4
  • Control Type : Rotary
  • Remote Control Included : No
  • PTAC : No

Technical Details

  • Energy Star Rated : Yes
  • ADA Compliant : No
  • Plug Type : 5-15P
  • Voltage : 115 Volts
Are you a builder

© 2015, AJ Madison Inc. or its affiliates