The M18CF Ductless Split System features a new level of system flexibility and control at your fingertips with the Advanced Inverter Technology. Inverter Technology lets you reach the desired temperature FASTER, maintain it MORE ACCURATELY, and REDUCE energy costs. It eliminates the constant compressor start-ups/ shut-downs required to maintain the set temperature with traditional technology. It controls compressor rotation speed precisely and adjusts capacity to meet demand, which in turn reduces energy consumption.
Inverter Technology allows each system to adjust capacity and cooling output to provide only the amount of cooling needed at a given time. For example, an 18,000 BTU/h system will operate even more efficiently as a 15,500 if that is all that's needed.
All of the Friedrich ductless split systems exceed the new 13.0 SEER requirements. And, a full one-third of the models have super high ratings ranging from 16.5 to 19.0 SEER.
Units are fully programmable, so setting and keeping the desired comfort level is a snap. Smart features like "Sleep Timer" and "Energy Saver" allow the user to program the unit for optimum energy savings. The continuous "Air Sweep" auto louvers gently distribute cool or warm air throughout the room.
A new level of system flexibility and control is at your fingertips on Friedrich single and multi-zone systems. You'll have more options for optimum comfort, control and energy savings.
Over 20 single, dual, tri- and quad-zone systems provide a wide range of heating and cooling options for even the toughest remodels, additions and improvements.
The Friedrich ductless split systems have the advantages of a ducted installation without the high material and labor costs. Absolutely no ductwork is required, so most systems can be installed and running in a few hours.
Residential/Commercial Applications
- Computer rooms/ server rooms
- Room additions/ renovations
- Homes without ductwork
- Kitchen and prep areas in restaurants
- Offices in warehouse spaces or large retail buildings
- Offices and buildings where security concerns prevent the installation of window units
Rated 4.7 out of 5 by 12
reviewers.
Rated 5 out of 5 Friedrich 18000 BTU Mini Split Air Conditioner M18
This is the best A/C ever!!!!. It is so quite and it's better than central air. No ducts. Europe had these years ago and I was so happy to see them finally come here. This is the BEST purchase we have made with A/C's. Will never get a window unit or thru the wall unit again.
12/7/11
Rated 5 out of 5 by Purplezebra Great product
I purchased this unit to cool a home theater in a bonus room over a two car garage. I did all the installation except for purging the control lines of air. The install itself is easy, but you will probably have to get a pro to hook up the control lines. The unit works very well and is very quiet, which was very important considering where it was located.
8/24/12
Rated 4 out of 5 nice a/c
clean appearance
low noise
fast turn-over of room temp.
7/30/12
Rated 5 out of 5 by goulrich48 I should have buy this unit a long time ago
for some items the french guide translation isn't too good so I had to refer to the english one to be sure about the instructions.
5/24/12
This product has not been reviewed.
Luxuries of a Mini-Split (Ductless Split System)
Ductless Split Air Conditioner & Heat Pump products offer wide versatility in solving your cooling and heating requirements. The Indoor unit (evaporator) is mounted inside the room, and usually goes very unnoticeable. It is connected to the outdoor unit (condenser) via refrigerant lines & inter-unit wiring through a 3-1/2" opening in the wall. Since no ductwork is required, installation is simple, fast & efficient. There is no need to use up window space or cut large openings in existing walls, which could undermine the integrity of your structure, and even pose security risks. Since the Rotary compressor is located in the outdoor unit, compressor operating noise is virtually eliminated from the indoor. The indoor unit has been uniquely designed to provide Whisper Quiet operation while delivering comfort throughout the room(s). In addition, rotary compressors provide efficient, powerful cooling at the lowest noise levels in the industry.
Installation & Warranty Info
AJ Madison recommends the installation of a Ductless Split System to be done by a trained and qualified HVAC technician with the proper knowledge and background. A trained technician will be able to judge the best location for the air handling (evaporator) unit and also the correct size for the area it has to cool. For assistance with all your technical needs please contact our technical department at hvactechsupport@ajmadison.com.
Note: AJ Madison will only finalize a Mini-Split (Ductless Split System) purchase with an authorized HVAC Technician.
Should you experience an issue during the installation or the initial startup of the unit please do not contact the manufacturer. You should have the technician that installed the units contact either AJ Madison or the manufacturer. We cannot accept any service or warranty calls from anybody but a licensed HVAC technician. We have full technical support team available to help you throughout the installation process.
AJ Madison, Inc. cannot be held liable for improper installation and operation of any product purchased from our company. Should a warranty issue arise where parts will need to be replaced, an installation receipt will be required along with your AJ Madison sales receipt. Failure to provide a receipt or invoice may result in the warranty not being honored.
Note: Warranties on mini split air conditioners only include parts and do not include labor. The licensed HVAC Technician who installs your air conditioner should always provide you with a labor warranty (preferably for a full year to compliment the manufacturers' parts warranty).
