Iron-A-Way E342A
42 Inch Built-In Ironing System Including Only Core Components With Customization in Mind


No Longer Available

Replaced by E42   compare>>

Door Hinge Options

Right Hinge Door Swing (RIGHTHINGE)  
Left Hinge Door Swing (LEFTHINGE)  

Additional Options


Adjustable Swivel Board

(IAASB) preview
+ $92.00 

Electrical Cord Wrap with Restraint (Factory Installed)

(001750) preview
+ $9.00 

Garment Bar (Factory Installed)

(001751) preview
+ $11.00 

Hot Iron Rest (Factory Installed)

(001758) preview
+ $32.00 


(001519) preview
+ $40.00 

60 Inch Wall Mounting Kit

(001522) preview
+ $39.00 

Steam/Dry Iron

(000232) preview
+ $38.00 
With the new Iron-A-Way Built-In Ironing Center, the everyday hassles of ironing your favorite garments can be eliminated permanently. When it comes to creating and maintaining a professional appearance at work, special events, or otherwise, one of the most important deciding factors is your attire. If you're clothes are not clean and pressed, it doesn't matter how expensive they were or how vibrant the color. This brand new built- in Ironing system provides you with many features to make the process of taking care of your clothes simple, quick, and efficient.

With the E342A model, you are receiving an expertly designed built-in Ironing System, but with only the basic core components included. This leaves you the freedom and flexibility to choose exactly what you want to add as options to create your own perfectly unique system.

Included are the hot iron storage compartment, the storage shelf, an appliance outlet, an on/off rocker switch, and an industry standard 42-inch, ventilated steel board. Now just simply add the rest of your desired options!
Overall height: 47 7/8"
Overall width: 15"
Overall depth including door: 7 3/8"
Dimension from wall to outer edge of Door (when recessed): 3 1/2"
Penetration into opening: 3 7/8"
Wall opening height: 47 1/8"
Wall opening width: 14 1/4"
Wall opening depth: 3 7/8"
Overlap distances when using wall opening dimensions listed above
Top overlap: 3/8"
Bottom overlap: 3/8"
Right side overlap: 3/8"
Left side overlap: 3/8"
Ironing Board: 42" Ventilated Steel
Hot Iron Storage Compartment: Standard
Storage Shelf: Standard
Full Length Piano Hinge: Standard
Ironing Board Cover and Pad: Standard
Electrical System: Rocker Switch with lighted indicator, safety door switch, appliance outlet
Hot Iron Rest: Optional
Electrical Cord Cover: Not Available
Electrical Cord Wrap: Optional
Garment Bar: Optional
Garment Hook: Standard
Adjustable Swivel Board: Optional
Spotlight (Less Bulb): Optional
Rowenta Iron: Optional
Steam/Dry Iron: Optional
Sleeveboard: Optional
Surface Mount Trim: Optional
Mirror and Brackets: Optional
Birch Veneer Door: Standard
Oak Raised Panel Door: Optional
Maple Raised Panel Door: Optional
Pine Raised Panel Door: Optional
White Raised Panel Door: Optional
White Flat Door: Optional
No Door: Optional
Interior Color: Cool Gray
Exterior Finish: Unfinished
Outside Dimensions: 15"x47 7/8"x7 3/8"
Rough-In-Opening Size: 14 1/4"x47 1/8"x3 7/8"
Outside Door Dimensions: 15"x47 7/8"
Box Carton Dimensions: 17 3/16"x55 1/8"x9 5/8"
Box Cubic Feet: 5.28
Approximate Shipping Weight: 55 lbs
Units per Pallet: 12
  • Features
  • 42" Ventilated Metal Board
  • 90 Degree Left/Right Swivel Option Available
  • Built-In Spotlight (Optional)
  • Electrical Outlet
  • Built-In On/Off Rocker Switch
  • Garment Hook
  • Premium Hot Iron Storage
  • Additional Storage Shelves
  • Flush Birch Door (Options)
  • Matching Appliance Door Overlays (Options)
  • Sleeveboard (Optional)
  • Trim Kit (Optional)
  • Additional Information
  • Unit may be surface mounted (unit extends approximately 7 3/8" into room) or recessed (unit extends approximately 3 1/2" into room) into any wall with standard 16 inch center studs.
  • See table to the right to determine desired ironing board height above the floor.
  • Unit can be provided with a left hinged door upon request. Right hinge is standard.
  • Comes standard with birch veneer door.
  • Electrical requirements for E-342: 115/120v, 15amps. Pigtails are provided in bottom of wire way for hookup to supply line. Make entrance into knockouts provided in top and bottom of wire way through heft-hand vent hole.
  • Electrical requirements for NE-342: The unit does not require electricity, it is non-electric.
  • Recommended to attach 2" x 4" cleats to studs, level with the bottom of opening (for support when recessing unit.)
  • Door opens approximately 180° . Allow at least 16" to the side of the unit for door to swing open (door hinges on full length piano hinge.)
  • E-342 and NE-342 options include: Surface mount trim, oak raised panel door, maple raised panel door, pine raised panel door, white raised panel door, flat white door, plate glass mirrored door, no door at all, hot iron rest, electric cord wrap, garment b
Product Reviews
Rated 5 out of 5 by 1 reviewer.
Rated 5 out of 5 by PLEASE HELP US LEVEL the product is quality, my complaint, is that the ironing board itself is on a slight incline which makes sitting the iron down a certain fear that the iron will tip over, can someone who is reading this advise us as to how we can adjust the slant and LEVEL! 1/28/15
  • 2016-02-12 T09:18:59.258-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_E342A, prod, sort_default
1-1 of 1
Items to Compare

Quick LookQuick Look

Quick Specs
Quick Specs


  • Color : Other
  • Accepts Panels : Yes


  • Width : 15 Inch
  • Depth : 7 3/8 Inch
  • Height : 47 7/8 Inch
  • Cutout Width : 14 1/4 Inch
  • Cutout Depth : 3 7/8 Inch
  • Cutout Height : 47 1/8 Inch


  • Ironing Board Size : 42 Inch
  • Internal Power Socket : Yes
  • Internal Light : Optional
  • Iron Rest : Optional

Technical Details

  • Amps : 15
  • Voltage : 115 Volts
Are you a builder

© 2016, AJ Madison Inc. or its affiliates