Halcyon mini-split systems are a quiet and non-intrusive ductless solution for cooling and heating in the home or business. Because a mini-split is comprised of an indoor and outdoor unit, this allows for a quieter and peaceful inside environment by enabling your contractor to install louder components like compressors and outdoor motors.
Copper tubing running through a small 3-inch opening in the wall or ceiling easily connects the indoor and outdoor units. Refrigerant is cycled through the lines from the outdoor condensing unit to the indoor air handler, where the air is quietly distributed to the interior space.
Conventional air duct systems tend to be bulky and can require special structural attention while Halcyon system piping can often be routed through walls and joists to maintain aesthetics.
Note: Mini split A/C units require professional installation by an HVAC technician. The labor warranty is provided by the HVAC installer.
FEATURES AND BENEFITS
*Ease of installtion.
*Simple zone control for increased comfort and efficiency.
*Remote controls easily adjust indoor climates in multiple zones of your home or business.
*Reduced system energy losses because distribution takes place through insulated refrigeration lines rather than ductwork.
*Aesthetics are improved over window units and no windows need to be blocked.
*Smart environmental control through Artifical Intelligence Technology. The use of microcomputers enables our products to think and respond to changing conditions,allowing carefree operation and optimum comfort.
Installation is as simple as 1,2,3...
1.Mount indoor and outdoor units.
2.Connect the refrigerant lines.
3.Make a few electrical connections.
An easy installation for your contractor saves you time and money.
Special Features
AUTO RESTART/RESET: In the event of a temporary power
failure, these systems will automatically restart in the same
operating mode as before once the power has been restored.
AUTO LOURVE FUNCTION: This feature enhances the air distribution
by enabling the user to automatically set a gentle, "air
sweep" motion in various patterns from the remote control. A
vertical lourved motion for systems 9C1 & 12C1, & a "dual
lourved" function for systems 18C1, 24C1 & 30C1 provide vastly
improved air flow.
POWER DIFFUSER: An additional feature triggered by the
maximum auto louver function has been created with the
"power diffuser". This additional louver opens based on our AI
technology ( Artificial Intelligence ) monitoring sensors to quickly
enhance immediate comfort needs.
SLEEP FUNCTION: This feature automatically adjusts the temperature
while you sleep to make you more comfortable.
Smaller models also incorporate an extra "Quiet" fan speed to
be sure your are not disturbed.
DRY MODE: This setting helps control humidity levels when
cooling may not be needed.
MODERATE LOW AMBIENT OPERATION: This additional
feature allows the system to operate indoors, even when outdoor
ambient temperatures are 32°F, without any additional
accessory.
ENERGY SAVER MODE: The Fujitsu system "energy saver"
mode allows the unit to keep your room cool enough for comfort
by using a relaxed thermostat setting, automatically reducing
power consumption (Systems 18C1/24C1/30C1).
This product has not been reviewed.
Luxuries of a Mini-Split (Ductless Split System)
Ductless Split Air Conditioner & Heat Pump products offer wide versatility in solving your cooling and heating requirements. The Indoor unit (evaporator) is mounted inside the room, and usually goes very unnoticeable. It is connected to the outdoor unit (condenser) via refrigerant lines & inter-unit wiring through a 3-1/2" opening in the wall. Since no ductwork is required, installation is simple, fast & efficient. There is no need to use up window space or cut large openings in existing walls, which could undermine the integrity of your structure, and even pose security risks. Since the Rotary compressor is located in the outdoor unit, compressor operating noise is virtually eliminated from the indoor. The indoor unit has been uniquely designed to provide Whisper Quiet operation while delivering comfort throughout the room(s). In addition, rotary compressors provide efficient, powerful cooling at the lowest noise levels in the industry.
Installation & Warranty Info
AJ Madison recommends the installation of a Ductless Split System to be done by a trained and qualified HVAC technician with the proper knowledge and background. A trained technician will be able to judge the best location for the air handling (evaporator) unit and also the correct size for the area it has to cool. For assistance with all your technical needs please contact our technical department at hvactechsupport@ajmadison.com.
Note: AJ Madison will only finalize a Mini-Split (Ductless Split System) purchase with an authorized HVAC Technician.
Should you experience an issue during the installation or the initial startup of the unit please do not contact the manufacturer. You should have the technician that installed the units contact either AJ Madison or the manufacturer. We cannot accept any service or warranty calls from anybody but a licensed HVAC technician. We have full technical support team available to help you throughout the installation process.
AJ Madison, Inc. cannot be held liable for improper installation and operation of any product purchased from our company. Should a warranty issue arise where parts will need to be replaced, an installation receipt will be required along with your AJ Madison sales receipt. Failure to provide a receipt or invoice may result in the warranty not being honored.
Note: Warranties on mini split air conditioners only include parts and do not include labor. The licensed HVAC Technician who installs your air conditioner should always provide you with a labor warranty (preferably for a full year to compliment the manufacturers' parts warranty).
